![](https://framerusercontent.com/images/CPpdHJV88MjPe7maqZ50mt11Mk.jpg)
Specifications:
Technical Specifications:
• Weight: GVM: 30,000kg, GCM: 45,000kg, Tare: 23,000kg, Steers: 4.56kg, Drives: 7.80kg
• Dimensions: Height: 4.360m with Flag Pole Fitted/ 3.6m without, Length: 8000mm, Width: 2500mm, Wheel Base: 4400mm, Rear O/Hang: 2150mm
Module Specifications:
• Hoist: Penta- 4 stage telescopic hoist, (External, Front of Body type), of 30 Tonne capacity
• PTO/Pump: OMFB with suitable flow rate for hoist (AUTO Gearbox Only)
• Control Valve: 130L Air Operated Control Valve
• Cab Controls: PTO CAB CONTROLS CK type with SLOW LOWER, Auto Dis and Auxiliary Switch for Tailgate Lock.
• Oil Tank: 130 Liter capacity with mounting brackets, rubber strap manual shut off valve
• Subframe: SHS (75mm) with hoist mount, body guides and rear pivot bushes.
• Main runners: Steel Channel. (150mm)
• Floor: 4.0mm Hardox Steel Plate.
• Sides: 4.0mm Hardox Steel Plate.
• Rear Uprights: Rect Hollow Section (125x75mm)
• Top Rails: 100mm SHS
• Front: 4.0mm Hardox Steel Plate with pressed Cab shield, Extended Slightly Over Cab.
• Tailgate: 4.0mm Hardox Steel Plate with 75mm SHS Top Rail and 125x75mm RHS Upright Supports
• Tailgate Hinges: Two Way, Top and Side Swing (Wraparound). All Greaseable, Top RH Pin Release Operated from Ground
• Tailgate Lock: Air Operated, (cab controlled)
• Rear Skirt: Standard Protected Recessed Tailgate Locking Mechanism
Additional Features:
• Steps: Yellow Fold down Ladder to front, kerb side of body.
• Shovel Rack: One (1), front of body.
• Tie Rails: Tie rails to each side of body and to tailgate
• Body Prop: One (1) only Manual type as a ‘Duty of Care ‘requirement
• Electrical: Recessed LED Taillights, all other necessary traffic lights and wiring, LED Side Clearance lights, all tipper electrical wiring wrapped in conduit and P clamped to welded screw inserts along body.
• Paint System: All external s, Primed and Painted in 2-Pack Polyurethane (White to match Cab only)
• Finish Items: Pressed Steel Mudguards to side of body over bogie with ORH Mud flaps to front and Cab/Chassis Supplier Mud flaps to rear with Swinging Rear Mud flaps, Necessary Safety and Warning Signs.
• Toolbox: Optional
Something about Support
Seamlessly collaborate with your team in real-time. Share ideas, give feedback, and make edits together, no matter where you are.