Specifications:

Technical Specifications:

• Weight: GVM: 30,000kg, GCM: 45,000kg, Tare: 23,000kg, Steers: 4.56kg, Drives: 7.80kg

• Dimensions: Height: 4.360m with Flag Pole Fitted/ 3.6m without, Length: 8000mm, Width: 2500mm, Wheel Base: 4400mm, Rear O/Hang: 2150mm

Module Specifications:

• Hoist: Penta- 4 stage telescopic hoist, (External, Front of Body type), of 30 Tonne capacity

• PTO/Pump: OMFB with suitable flow rate for hoist (AUTO Gearbox Only)

• Control Valve: 130L Air Operated Control Valve

• Cab Controls: PTO CAB CONTROLS CK type with SLOW LOWER, Auto Dis and Auxiliary Switch for Tailgate Lock.

• Oil Tank: 130 Liter capacity with mounting brackets, rubber strap manual shut off valve

• Subframe: SHS (75mm) with hoist mount, body guides and rear pivot bushes.

• Main runners: Steel Channel. (150mm)

• Floor: 4.0mm Hardox Steel Plate.

• Sides: 4.0mm Hardox Steel Plate.

• Rear Uprights: Rect Hollow Section (125x75mm)

• Top Rails: 100mm SHS

• Front: 4.0mm Hardox Steel Plate with pressed Cab shield, Extended Slightly Over Cab.

• Tailgate: 4.0mm Hardox Steel Plate with 75mm SHS Top Rail and 125x75mm RHS Upright Supports

• Tailgate Hinges: Two Way, Top and Side Swing (Wraparound). All Greaseable, Top RH Pin Release Operated from Ground

• Tailgate Lock: Air Operated, (cab controlled)

• Rear Skirt: Standard Protected Recessed Tailgate Locking Mechanism

Additional Features:

• Steps: Yellow Fold down Ladder to front, kerb side of body.

• Shovel Rack: One (1), front of body.

• Tie Rails: Tie rails to each side of body and to tailgate

• Body Prop: One (1) only Manual type as a ‘Duty of Care ‘requirement

• Electrical: Recessed LED Taillights, all other necessary traffic lights and wiring, LED Side Clearance lights, all tipper electrical wiring wrapped in conduit and P clamped to welded screw inserts along body.

• Paint System: All external s, Primed and Painted in 2-Pack Polyurethane (White to match Cab only)

• Finish Items: Pressed Steel Mudguards to side of body over bogie with ORH Mud flaps to front and Cab/Chassis Supplier Mud flaps to rear with Swinging Rear Mud flaps, Necessary Safety and Warning Signs.

• Toolbox: Optional

Specifications:

Technical Specifications:

• Weight: GVM: 30,000kg, GCM: 45,000kg, Tare: 23,000kg, Steers: 4.56kg, Drives: 7.80kg

• Dimensions: Height: 4.360m with Flag Pole Fitted/ 3.6m without, Length: 8000mm, Width: 2500mm, Wheel Base: 4400mm, Rear O/Hang: 2150mm

Module Specifications:

• Hoist: Penta- 4 stage telescopic hoist, (External, Front of Body type), of 30 Tonne capacity

• PTO/Pump: OMFB with suitable flow rate for hoist (AUTO Gearbox Only)

• Control Valve: 130L Air Operated Control Valve

• Cab Controls: PTO CAB CONTROLS CK type with SLOW LOWER, Auto Dis and Auxiliary Switch for Tailgate Lock.

• Oil Tank: 130 Liter capacity with mounting brackets, rubber strap manual shut off valve

• Subframe: SHS (75mm) with hoist mount, body guides and rear pivot bushes.

• Main runners: Steel Channel. (150mm)

• Floor: 4.0mm Hardox Steel Plate.

• Sides: 4.0mm Hardox Steel Plate.

• Rear Uprights: Rect Hollow Section (125x75mm)

• Top Rails: 100mm SHS

• Front: 4.0mm Hardox Steel Plate with pressed Cab shield, Extended Slightly Over Cab.

• Tailgate: 4.0mm Hardox Steel Plate with 75mm SHS Top Rail and 125x75mm RHS Upright Supports

• Tailgate Hinges: Two Way, Top and Side Swing (Wraparound). All Greaseable, Top RH Pin Release Operated from Ground

• Tailgate Lock: Air Operated, (cab controlled)

• Rear Skirt: Standard Protected Recessed Tailgate Locking Mechanism

Additional Features:

• Steps: Yellow Fold down Ladder to front, kerb side of body.

• Shovel Rack: One (1), front of body.

• Tie Rails: Tie rails to each side of body and to tailgate

• Body Prop: One (1) only Manual type as a ‘Duty of Care ‘requirement

• Electrical: Recessed LED Taillights, all other necessary traffic lights and wiring, LED Side Clearance lights, all tipper electrical wiring wrapped in conduit and P clamped to welded screw inserts along body.

• Paint System: All external s, Primed and Painted in 2-Pack Polyurethane (White to match Cab only)

• Finish Items: Pressed Steel Mudguards to side of body over bogie with ORH Mud flaps to front and Cab/Chassis Supplier Mud flaps to rear with Swinging Rear Mud flaps, Necessary Safety and Warning Signs.

• Toolbox: Optional

Specifications:

Technical Specifications:

• Weight: GVM: 30,000kg, GCM: 45,000kg, Tare: 23,000kg, Steers: 4.56kg, Drives: 7.80kg

• Dimensions: Height: 4.360m with Flag Pole Fitted/ 3.6m without, Length: 8000mm, Width: 2500mm, Wheel Base: 4400mm, Rear O/Hang: 2150mm

Module Specifications:

• Hoist: Penta- 4 stage telescopic hoist, (External, Front of Body type), of 30 Tonne capacity

• PTO/Pump: OMFB with suitable flow rate for hoist (AUTO Gearbox Only)

• Control Valve: 130L Air Operated Control Valve

• Cab Controls: PTO CAB CONTROLS CK type with SLOW LOWER, Auto Dis and Auxiliary Switch for Tailgate Lock.

• Oil Tank: 130 Liter capacity with mounting brackets, rubber strap manual shut off valve

• Subframe: SHS (75mm) with hoist mount, body guides and rear pivot bushes.

• Main runners: Steel Channel. (150mm)

• Floor: 4.0mm Hardox Steel Plate.

• Sides: 4.0mm Hardox Steel Plate.

• Rear Uprights: Rect Hollow Section (125x75mm)

• Top Rails: 100mm SHS

• Front: 4.0mm Hardox Steel Plate with pressed Cab shield, Extended Slightly Over Cab.

• Tailgate: 4.0mm Hardox Steel Plate with 75mm SHS Top Rail and 125x75mm RHS Upright Supports

• Tailgate Hinges: Two Way, Top and Side Swing (Wraparound). All Greaseable, Top RH Pin Release Operated from Ground

• Tailgate Lock: Air Operated, (cab controlled)

• Rear Skirt: Standard Protected Recessed Tailgate Locking Mechanism

Additional Features:

• Steps: Yellow Fold down Ladder to front, kerb side of body.

• Shovel Rack: One (1), front of body.

• Tie Rails: Tie rails to each side of body and to tailgate

• Body Prop: One (1) only Manual type as a ‘Duty of Care ‘requirement

• Electrical: Recessed LED Taillights, all other necessary traffic lights and wiring, LED Side Clearance lights, all tipper electrical wiring wrapped in conduit and P clamped to welded screw inserts along body.

• Paint System: All external s, Primed and Painted in 2-Pack Polyurethane (White to match Cab only)

• Finish Items: Pressed Steel Mudguards to side of body over bogie with ORH Mud flaps to front and Cab/Chassis Supplier Mud flaps to rear with Swinging Rear Mud flaps, Necessary Safety and Warning Signs.

• Toolbox: Optional

VIEW MORE

Extensive Parts Inventory

OEM Quality Assurance

Expert Technical Support

TRUCK SALES

Get a quote

Where to find us

Get a quote

Where to find us

Get a quote

Where to find us

TRUCKS CATALOGUE

TRUCKS CATALOGUE

TRUCKS CATALOGUE

Extensive Parts Inventory

OEM Quality Assurance

Expert Technical Support